BASE MASTER
(For conductive materials)
- BM-50H
(For all materials)
- BM-50GH / BM-100GH
- BM-50MH
•Pre-set ø0.05mm tools.
BASE MASTER mini
(For all materials)
- BMM-10H
•10mm reference height Tool Offset Sensor!
- BMM-20D
- BMM-20H
•Detection in CNC automatic lathe.
Quick detection of the cutting edge position.
360˚light ring for the ultimate visibility.
- Large stroke that prevents collision: 10mm.
- Uses a large, easily read dial gauge.
- Reference can be checked with a setting gauge (100mm).
- Can also measure non-conductive workpieces and tools.
- Firmly fixed with a magnet.
(5.6MB)
Cutting edge position detection of 100mm from workpiece top surface using a dial gauge.
Notifies the height with LED and buzzer.
 |
 |
|---|---|
| BBT | HSK |
For all materials
- POINT MASTER PRO PMP
For conductive materials
- POINT MASTER PMG
- POINT MASTER PMC
LED notification of the reference position.
Touch sensors provided with high precision stroke and interchangeable stylus for measuring different applications.
- XYZ direction measurement possible with a single tool.
- Can also measure non-conductive workpieces.
- Compact design that prevents interference with workpieces.
- Calculation of the stylus ball radius not required.
(5.6MB)
Check the reference point in XYZ directions with a large dial gauge Easy to read with a large dial gauge
- With a Dial Gauge always facing front, toolholder.
- Unrestricted mounting positions with a magnet base.
- Compact design of 90mm total length, ideal for small lathes.
Unique centering tool for lathes with superior visibility.
Dial gauge always stays in front of the operator.
It is easy to preset with high precision 2D edge sensor.
Simple & compact design without compromising accuracy.
- Diameter and length measurement
- Drill corner measurement
- Chamfering size measurement
|
|
 |
|---|---|---|
| BBT | HSK | BIG CAPTO |
- Precision measuring tools of the highest quality for machine tool maintenance.
- The dynamic accuracy of a machine spindle is determined by measuring runout accuracy while the spindle is actually rotating.
|
 |
- Higher hardness than steel for good scratch resistance.
- Made of ceramic (white), it allows even a thin coating of Prussian blue to show up clearly.
- Rustproof / Non-magnetizing / No aging deterioration.
- Compatible spindles BBT(BT)30/40/50 Can also be used with ANSI/DIN standard spindles.
A ceramic taper gauge allowing inspection of machine spindle tapers at a glance.
 |
|---|
| BT |
For maintenance of machine tool spindle!
- Measuring equipment of misalignment between the ATC arm and machine tool spindle or magazine pot center.
- Dial indicator aids quick adjustment.
 |
- High precision “simultaneous bi-axial levelling device” optimal for controlling the level of machine tools or precise assembling equipments.
